| IP filter |
 Posted by
Hejczei József
on Tuesday, June 10, 2003 at 4:58:27 AM (EST)
I need some help in connection IP filter settings. I have a computer with two network interface card (NIC1, NIC2). The NIC1 connecting to a cable modem. The NIC2 connecting to the internal LAN, its IP address is 192.168.1.1. During installation IP filter recognises the NIC1 IP address (example 156.142.128.24) and inserts it to the first line. IP filter denies internet connection requests which arrives from NIC2. How can I configure IP filter that requests from NIC2 get through the filter.
|
 Posted by
Robert Smith
on Friday, June 13, 2003 at 8:18:12 AM (EST)
Go to the IP filter and change the IP address to the following:
IP: 192.168.1.0
Mask: 255.255.255.0
Dest IP: 0.0.0.0
Dest Mask: 0.0.0.0
This was taken from the manual. :)
|
Posted by
Hejczei József
on Friday, June 13, 2003 at 8:33:53 AM (EST)
Thanks, it is working.
|
|
