| VPN "gateway" possible? |
 Posted by
Harald Bilke
on Wednesday, November 22, 2006 at 3:40:32 AM (EST)
Hi fellas,
is the following setup possible at all?
DSL---LS 2004 (latest)---Draytek Vigor 2910 (VPN)---LAN
I'd like to use the WinXP builtin capabilities (IPSec) and have forwarded the needed ports/protocols to the Vigor and opened the way back but can't get a connection (the VPN seems to be established). Any hints?
The 2910 could be set in front - but will LS forward the VPN-traffic?
Thanx in advance
|
 Posted by
Andy Sharrem
on Saturday, November 25, 2006 at 2:26:52 PM (EST)
It should be possible, I had a similar setup but using the LS2004 w2k svr as the VPN Server.
DSL > LS2004(Firewall-VPN ports open) > LAN.
In your scenario you would have to add some mapped links directed to the VPN Server.
Fiewall and proxy log files should help the debug process.
|
Posted by
Harald Bilke
on Tuesday, November 28, 2006 at 7:01:10 AM (EST)
Hi,
ok - but I'd need mapped links back, too I assume?
Thanx
Harald
|
Posted by
Andy Sharrem
on Thursday, November 30, 2006 at 10:17:19 PM (EST)
Short answer is no. As long as the Local side of LS2004 and the VPN are on the same subnet or are routed correctly, you should be ok.
|
Posted by
Harald Bilke
on Thursday, December 07, 2006 at 10:17:38 AM (EST)
Hi Andy,
what software did you use as VPN Server on the LS2004 box? Can't get the Vigor running in my setup.
Thanx
Harald
|
Posted by
Harald Bilke
on Thursday, December 14, 2006 at 8:24:49 AM (EST)
Hi Andy, me again
tried mappings et al. (permissions, mapped links)
But I get "remote administration not allowed on this port (1723).
How comes?
|
|
