| ISDN and FAX |
 Posted by
Marcus Mueller
on Wednesday, January 23, 2002 at 9:32:26 AM (EST)
Hi, sending faxes is working. Receiving not :o(. I have a AVM ISDN card. CAPI.....but I can use a G3 Fax emulaton modem. I need a modem string....???
@ the moment: ATQ0V1E1x3s0=0
Respond: no carrier
Error 202 Error setting modem
:o?
|
 Posted by
Carlo Turk
on Thursday, January 24, 2002 at 2:36:29 PM (EST)
Marcus, do you use rvs-com to emulate ??
Is there not a capi driver for your ISDN with fax capability.
I use Teles and the capi driver from Teles has a fax capability.
This works perfect. I had problems with fax emulation software to.
|
Posted by
Marcus Mueller
on Thursday, January 24, 2002 at 3:12:19 PM (EST)
I have CAPI there. And also a Fax G3 Emulation..also 4 analog Modem Emulator. I can send stuff, but not receive. MSN numbers I set now for receiving....do you use the normal general Modem Init String ??? hmmm, I try and try...
|
Posted by
Bruno Zimmerli
on Thursday, August 29, 2002 at 5:20:06 PM (EST)
I have the same modem and the same problem! I need help ...
receiving doesn´t work.
Sending is fine!
|
Posted by
Michael Wimmer
on Monday, September 02, 2002 at 1:00:09 PM (EST)
Hello!
I have had (I think) the same problem.
I've tried about 5 hours to run the fax recieving :-(
But now I've found an difference between hayes and avm AT strings: avm ATE0 disables pressed keys and hayes ATE0 enables pressed keys.
So i tried follwing string for init:
ATQ0V1E0S0=0S31=3
and for deinit:
AT (with Z I have problems).
In Fax G3 modem configuration:
ATS31=3; S49=18; S50=18; (last 2 for MSNs accept and sending)
You can try it, I hope it works on your system too.
For information: I have an AVM B1 ISA Card, but the CAPI modems are the same. CAPI modem driver is from April 2002.
Bye,
Michael
|
|
